Run time for load – 8000W 5m
Max. Capacity Used – 100%
Output power capacity – 8.0kWatts / 8.0kVA
(1) Hard Wire 3-wire (H N + G) (Battery Backup)
(4) IEC 320 C19 (Battery Backup)
(3) IEC Jumpers (Battery Backup)
(6) IEC 320 C13 (Battery Backup)
Nominal Output Voltage – 230V
Nominal Input Voltage – 230V, 400V 3PH
Hard Wire 3 wire (1PH+N+G), Hard Wire 5-wire (3PH + N + G)
APC Smart-UPS SRT 8000VA 230V
High density, double-conversion online power protection with scalable runtime
Includes: CD with software, Documentation CD, Installation guide, Temperature Probe, USB cable, Warranty card, Web/SNMP Management Card
10/100 BaseT Connection
Connect the device to a network using a 10 or 100 BaseT connection
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
The patent-pending operating mode bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters, and alarms.
Smart-UPS On-Line Features & Benefits
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Provides notification of changing utility power and UPS power conditions
A periodic battery self-test ensures early detection of a battery that needs to be replaced.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Minimizes installation costs by enabling the use of smaller generators and cabling.
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Provides temporary battery power when the utility power is out.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Allows additional run time to be quickly added as needed.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Max Configurable Power (Watts) – 8.0kWatts / 8.0kVA
Output Voltage Distortion – Less than 2%
Output Frequency (sync to mains) 50/60Hz +/- 3 Hz
Other Output Voltages – 220, 240
Load Crest Factor 3: 1
Topology Double Conversion Online
Internal Bypass (Automatic and Manual)
40 – 70 Hz (auto sensing)
Input voltage range for main operations
160 – 275V
Input voltage adjustable range for mains operation
100 – 275 (half load), 173 – 476 (half load)V
Other Input Voltages
220, 240, 380, 415
Batteries & Runtime
Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof
Typical recharge time
Nominal Battery Voltage
+/-192 V (split battery referenced to neutral)
Expected Battery Life (years) – 3 – 5
RBC Quantity – 2
Extendable Run Time – 1
Battery Volt-Amp-Hour Capacity
Extended Run Options