Tricolour LED is a visual indicator to the user of the current status of the radio. Solid red light means the radio is currently transmitting, Solid green means the radio is currently receiving, Alternating between red and green means the VOX (voice activation) gain is being adjusted, Blinking red means the battery power is low, and blinking green means the radio is in scan mode (requires dealer programming)
9-Hour Use means that the TK-2000 can last up to 9 hours when used 5% for transmitting, 5% for receive, and 90% in standby mode.
Powerful RF Output allows the TK-2000 to transmit on 5W, with its brother, the TK-3000 UHF to transmit on 4W.
Battery Saver Mode allows the radio to enter a low power mode and extend battery life. Whilst in low power mode the radio may take a fraction of a second longer to recognize an active radio transmission.
Busy Channel Lockout mode will help prevent transmission collisions. This means that whilst the transmission is being broadcast and received, the user cannot initiate a broadcast. Pressing the push-to-talk (PTT) will result in an error code. This function needs to be enabled by Radiotronics when programming.
Compact Design means the TK-2000 weighs only 203g, making the TK2000 one of the lightest two-way radios on the market.
Commanded Audio ensures the TK-2000 delivers superior audio quality and helps to prevent audio distortion when receiving or transmitting.
DTMF enables the radio to receive pre-determined codes to recognize an incoming transmission.
Enhanced Kenwood Audio ensures the ultimate in loud and clear audio from the TK-2000.
Kenwood ESN is the Kenwood electronic serial number that allows the radio to be recognized during transmission.
Multiple Scanning Function allows the dealer to program multiple different scan types.
Kenwood TK-2000 has a Programmable Function Key below the PTT paddle that can be programmed to allow modification of almost any radio function from power hi/low, to a quick access function.
CTCSS and/or DCS means the TK-2000 can block out unwanted interference and other radio traffic, ensuring an interference-free radio experience.
When using a repeater, in the event of a repeater failure, talk-around allows the user to switch to broadcast on the repeater’s transmission frequency. This allows the user to make important announcements, even when the repeater has failed.
Time-out Timer means that in the case that the user has accidentally jammed the PTT paddle, the radio will stop transmitting within 30 seconds. This can usually be programmed to anywhere from 5 seconds to 30 seconds by Radiotronics.
Voice Activation (VOX) means that the user can use the radio in a completely hands-free mode. This can only usually be achieved by using voice activation (VOX) enabled accessory such as an earpiece. It’s important to note that the user must be using a VOX enabled earpiece in order for VOX to work.
Dealer / Software Programmable means that the TK2000 by Kenwood is completely programmable and customizable. Either the user can request the dealer (Radiotronics) to program the radio, or the user can download the programming software and purchase suitable programming leads to program the radio themselves.
WHAT IN THE BOX
Kenwood TK-2000 Radio
Kenwood KRA-26M VHF Antenna or KRA-23M Antenna
Kenwood KNB-63L Li-Ion Battery
Kenwood KBH-18 Belt Clip
Optional Kenwood KSC-35SE Rapid Battery Charger
SPECIFICATIONS OF TK-2000 TWO WAY RADIO WALKIE TALKIE